Sponsor Sales & Specials - Diamond Pistons Sale at Texas Speed!




Sales2@Texas-speed
06-25-2009, 03:56 PM
We're going to hold a "while supplied last" summer special on some Diamond pistons for you all! YOU MUST CALL IN TO ORDER THESE WITH THE SALE PRICING! Here we go:

*D816TS - Diamond Racing Forged Piston Set: 4.080 Bore, 4.000 Stroke, 6.125 Rod Length, 1.120 CD, -10cc Dish, Includes .927 x 2.50 Wrist Pins - $615.00
*D811TS - Texas Speed Exclusive LS7 Flat-Top Piston Set: 4.127" Bore, 4.000" Stroke, 6.125" Rod Length, -3.8cc Valve Reliefs for LS7 Cylinder Heads, Includes Wrist Pins - $640.00
*D11503 - Diamond Racing LS1 Forged Flat-Top with -8.6cc Valve Reliefs, 3.905 Bore, 3.622 Stroke, 6.125 Rod Length; Will Handle Up To 20 psi Boost; .927 x 2.50 Wrist Pins Included - $595.00
*D810TS - Diamond Racing LSX Forged IBF Flat-Top Piston Set: 4.200 Bore, 4.100 Stroke, 6.125 Rod Length, -3.84cc Valve Reliefs for GM LS7 Cylinder Heads, .043/.043/3mm Ring Configuration, 1.065 CD, .927 x 2.250 Wrist Pins Included - $710.00
*D809TS - Diamond Racing Flat-Top Forged Piston Set: 4.125 Bore, 4.000 Stroke, 6.125 Rod Length, -3.84cc Valve Reliefs, For ETP LS7 4.10 Bore Cylinder Heads, Includes H13 Tool Steel Wrist Pins - $710.00
*D807TS - Diamond Racing Forged Piston Set: 4.010 Bore, 4.000 Stroke, 6.125 Rod Length, 1.115 CD, -28cc Dish, Includes HD H-13 Wrist Pins - $710.00
*D805TS - Diamond Racing Forged Piston Set: 4.010 Bore, 4.000 Stroke, 6.125 Rod Length, 1.120 CD, -10cc Dish, Includes .927 x 2.50 Wrist Pins - $615.00
*D11519 - Diamond Racing Forged Flat-Top LS1 Pistons: 4.030 Bore, 4.00 Stroke, -2cc Valve Reliefs, 6.125 Rod Length, Wrist Pins Included - $575.00
*D804TS - Diamond Racing Forged Piston Set: 4.010 Bore, 4.000 Stroke, 6.125 Rod Length, 1.120 CD, Flat-Top with -2cc Valve Reliefs, Includes .927 x 2.50 Wrist Pins - $575.00
*D11502 - Diamond Racing LS1 Forged Flat-Top with -2cc Valve Reliefs, 3.905 Bore, 3.622 Stroke, 6.125 Rod Length; .927 x 2.50 Wrist Pins Included - $550.00

We have the TotalSeal plasma-moly/Napier 2nd ring sets in stock for all of these and we will offer those ring sets for an additional $160. Also keep an eye out for a special we're about to offer for certain in stock short-blocks!


383lt1impala
06-25-2009, 10:30 PM
Would you say piston part # D807ts would be good to about 1500hp at the crank? Pm me. I have a 6.0 iron block that I don't want to open up much. With a 4 inch stroke.