BlackTA96

iTrader: (3)

Well I bought a TA as a roller a while back with plans to build a 408. I've got the 6.0 already, but don't have the cash to stroke it and everything I wanna do right now. So i've decide to throw a mild build together for now because i'm tired of looking at it sit in my driveway.

Let me know what yall think.

Stock rods/crank/pistons(lq4)
Stock 317's
New bearings/rings/gaskets
MS4/pushrods/prc dual spring .660 kit
About a 150~200 shot of juice.

Should be good for a 11 sec pass huh?

BlackTA96

iTrader: (3)

Forgot to add I have longtubes and a borla catback.
Also its probably gonna be the stock stall for now...dont want to spend the cash on a stall now because i have a 4l80 i'll be putting in in the future.

NemeSS

iTrader: (127)

do not reccomend ms4, it will be a dog.
not enuff scr, with rebuilt lq4 and even milled 317.
gt11 will make excellent power, excellent reponse. with rebuilt lq4 and milled stock 317

BlackTA96

iTrader: (3)

I was thinking about looking for some lq9 flat tops to bump comp..
only reason i was going ms4 is a guy i know has one for cheap he'd sell me.

NemeSS

iTrader: (127)

the lq9 piston would be beeter choice with milled 317, can get the scr to around 10.5 with milled heads, then the ms4 would work well, i would cut vr just to be safe

BlackTA96

iTrader: (3)

How far could you mill them down without getting into ptv issues?
I've been looking for a set of flat tops, can't find any...

sroach20

iTrader: (31)

with a stock stall you will need a tiny/stock cam.