Drag Racing Tech
Sponsored by:
Sponsored by:

its not 10's but I finally ran it full weight in street trim

Thread Tools
 
Search this Thread
 
Old 11-13-2003, 12:34 AM
  #1  
TECH Resident
Thread Starter
iTrader: (65)
 
Street Racer's Avatar
 
Join Date: Nov 2001
Location: Treasure Coast Fl.
Posts: 868
Likes: 0
Received 0 Likes on 0 Posts

Default its not 10's but I finally ran it full weight in street trim

Well tonight almost SUCKED the track is a solid hour drive from my house I was only about 3 miles from the track and had a front tire blow out on the way to the track and not getting there until almost 9pm but still get a few runs before they closed. these are a few of the passes

11.541 @ 120.36 1.78 60'
11.391 @ 122.33 1.66 60'
11.384 @ 122.38 1.64 60'
11.880 @ 119.49 1.60 60' "missed 3rd"

this was with with Full interior full exhaust and 16's all around and the car weighing in near 3460 with me in it . I think that it was a first time that I didnt strip it at all it was so hard not to Hopefully 10's are around the corner im sure with slicks and weight reduction I believe it will happen soon enough
Plus a special thanks to NastySS "Paul" for trying to coming out to help me to get me on the road again only to have a blow out himself and bent his rim
Old 11-13-2003, 10:01 AM
  #2  
"The Drag Racing Director"
iTrader: (10)
 
Coach 02 A3 Z/28's Avatar
 
Join Date: Jan 2002
Location: Tomball, TX.
Posts: 7,538
Received 4 Likes on 4 Posts

Default

Sorry about your bad luck going to the track but it sounds like you made some good runs.

Good luck on running for the 10's.

Coach




All times are GMT -5. The time now is 11:26 AM.