prostreet67

i lost the card for the jetting sizes for the plate setup for a 94 lt1, does anyone know the 75-175 jet sizes for the nitrous and fuel?

prostreet67

anyone?

jmill96Z

iTrader: (3)

Go to the Barry Grant website. They should have all the jetting there.

Chris@NitroDaves

I tried looking on Barry Grants website and i couldn't find the jetting newhere. This is something that you will more than likely have to call on.

-Chris

jmill96Z

iTrader: (3)

This is from the BG Site

http://www.barrygrant.com/fromBarryG...g%20Tables.pdf


This is from the BGJetting for vehicles with 50 psi fuel pressure
ATTENTION: For vehicles operating at 50 psi fuel pressure, use the following optional jetting. For
vehicles operating at 40 psi, use the standard jetting from the NitrousWorks instructions that accompanied
your kit.
Horsepower Level Nitrous Jet Fuel Jet Tuning Jet(s)
25 24 16 13, 18
50 33 22 20, 24
75 42 26 25, 28
100 55 29 28, 31
125* 59 31 29, 32
150* 62 32 31, 33
175* 70 33 32, 35
(*) These jets included in 17060 Nozzle Upgrade Kit
Failure to use the proper jetting to match your fuel pressure can result in poor performance and/or
severe engine damage!

Chris@NitroDaves

Where in the hell did you find that on their site.................................

-Chris

jmill96Z

iTrader: (3)

It's under the manual section.

I cheated though. I used to run that plate in my LT1.