My intake/exhaust mods.. opinions? (2 foot piping on open longtubes/custom cold air)
#1
TECH Regular
Thread Starter
Join Date: Jun 2006
Location: Alamo Heights, Texas
Posts: 440
Likes: 0
Received 0 Likes
on
0 Posts
My intake/exhaust mods.. opinions? (2 foot piping on open longtubes/custom cold air)
I wanted to get some opinions, as I modded my car kinda weird. I'll put the car on the dyno soon anyway.. but I wanted some feedback until then. First off, this is my cold air intake.
https://ls1tech.com/forums/texas-mem...coop-daez.html
It is built the same as the SLP cold air, but it just extends down farther. It's not inclosed or anything, so water wont be an issue. Also cut the air box for more flow.
My exhaust set up is pacesetter longtubes with about 1 1/2-2 foot of 3" piping attached on each side.. no mufflers or anything.
Think I'm getting more or less power on the exhaust compared to a normal set up? Let me know =D
Mods are in sig.
https://ls1tech.com/forums/texas-mem...coop-daez.html
It is built the same as the SLP cold air, but it just extends down farther. It's not inclosed or anything, so water wont be an issue. Also cut the air box for more flow.
My exhaust set up is pacesetter longtubes with about 1 1/2-2 foot of 3" piping attached on each side.. no mufflers or anything.
Think I'm getting more or less power on the exhaust compared to a normal set up? Let me know =D
Mods are in sig.