Eastern Members - goin heads and cam need input

01 ws6 with full bolt ons

i have a set of prc stage 1 cnc'ed ls6 heads the 237 cc heads

i was thnking mti X1 cam with those heads i have a vig 3800


iam not getting any feed back from the other post so i figure ill ask the peeps i know on here.


what should my gains be and what will the faults be if any?

i dont wanna go bgger i can get decent power out of that cam



help me out guys

Id get the TR230/224 cam over the X1.

with that converter i would run polluter cam. very driveable for a big cam
what are your ultimate goals with car?
have ran 224/230 cam in a few cars. have had great results with that cam

iam not trying to go as big as a polluter cam, i like what i have heard about the X1, not a giant cam great power and great sound. u wouldnt happen to have a cam that would word. iam a cheap ass

i have a 236/236 cam. will sell cheap. can't remember exact specs. little over 600 lift and 112 lsa

Do a search on the Dominator 2 cam and then call me...

+1 on the dominator 2 cam.