Stock cam or Xfi 292
07-07-2009, 05:38 PM
#1
TECH Apprentice
Thread Starter
Join Date: Apr 2006
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
Stock cam or Xfi 292 I am finishing up a single turbo kit for my 383 lt1 and I am torn between using my stock cam or leaving in the xfi 292 in that's still in it. Is it worth it to switch back to the stock cam? It would be very easy to do as everything is off the motor ATM.
I don't want to buy a new cam yet, because the lt1 motor is only being used to get the turbo system built and tested, and then I am building a gen 1 sbc to throw it on.
xfi 292 cam which is 242 int./248 exh. --- 0.584 int./0.579 exh. lift --- at 113 lsa
opinions?
I don't want to buy a new cam yet, because the lt1 motor is only being used to get the turbo system built and tested, and then I am building a gen 1 sbc to throw it on.
xfi 292 cam which is 242 int./248 exh. --- 0.584 int./0.579 exh. lift --- at 113 lsa
opinions?
