Nine Finger 02 Z28

iTrader: (11)

I went out to Pheonix this weekend for the PSCA Finals and I took my car out there for some Test and Tune between rounds.

Sat.

1st Run
1.552 60ft
4.376 330ft
6.735 1/8et
104.593 1/8 mph
10.502 1/4et
130.282 1/4mph

2nd Run
1.541 60ft
4.364 330ft
6.728 1/8et
104.283 1/8mph
10.500 1/4et
130.298 1/4mph

3rd Run
1.568 60ft
4.372 330ft
6.730 1/8et
104.639 1/8mph
10.495 1/4et
130.529 1/4mph

The first runs were done with no NOS off of the line because I wasn't sure what to expect.So I decided to pull out 2 plugs which they both seem to be a bit lean.That jetting was .52 NOS .32 Fuel so I put in a .35 fuel and finally started leaving on the NOS.

4th Run
1.430 60ft
4.225 330ft
6.581 1/8et
104.601 1/8mph
10.352 1/4et
130.282 1/4mph

5th Run
1.466 60ft
4.256 330ft
6.614 1/8et
104.502 1/8mph
10.384 1/4et
130.263 1/4mph

6th Run
1.537 60ft
4.361 330ft
6.723 1/8et
104.452 1/8mph
10.491 1/4et
130.382 1/4mph

7th Run the bottle was getting low
1.524 60ft
4.369 330ft
6.744 1/8et
103.863 1/8mph
10.532 1/4et
129.654 1/4mph

8th Run nearly empty bottle
1.517 60ft
4.367 330ft
6.779 1/8et
101.866 1/8mph
10.648 1/4et
127.070 1/4mph

Sun

1st Run fresh bottle New Best
1.461 60ft
4.238 330ft
6.582 1/8et
105.221 1/8mph
10.327 1/4et
131.174 1/4mph

2nd Run
1.489 60ft
4.277 330ft
6.624 1/8et
104.956 1/8mph
10.383 1/4et
130.536 1/4mph

3rd Run
1.576 60ft
4.377 330ft
6.722 1/8et
105.275 1/8mph
10.466 1/4et
131.116 1/4mph

4th Run
1.502 60ft
4.317 330ft
6.676 1/8et
104.514 1/8mph
10.446 1/4et
130.209 1/4mph

5th Run
1.626 60ft
4.452 330ft
6.816 1/8et
104.399 1/8mph
10.592 1/4et
130.100 1/4mph

6th Run I guess the bottle must have been near empty
1.512 60ft
4.375 330ft
6.803 1/8et
101.346 1/8mph
10.698 1/4et
126.219 1/4mph

The rest on the motor
7th Run
1.655 60ft
4.720 330ft
7.270 1/8et
96.434 1/8mph
11.336 1/4et
121.413 1/4mph

8th Run
1.726 60ft
4.772 330ft
7.300 1/8et
97.323 1/8mph
11.336 1/4 et
122.313 1/4mph

9th Run
no slip the tower said that they didn't have it but told me that I ran a 11.35 at 122

All runs were made on complete stock fuel system,stock Rear End with 4.10's and Eaton Posi on 28x10.5 ET Drags,and stock short block.
Race weight is 3160#'s with me in it.

bad2000ss

iTrader: (6)

Nice runs Nine Finger!!! 10's must feel really good, looks like you got that car dialed in pretty good. And all runs on the stock rear?!?!?!?! that must be some kind of a record, LOL.

Vents

iTrader: (9)

hrmm...

Deividas93GT

How did that rear end hold up? What kinds of heads/cam are you running?

Nine Finger 02 Z28

iTrader: (11)

I got my heads from here http://www.donleeauto.com/ and I have a 229 cam.I am very surprised the rear end still seems fine for now...

1bad346Z28

What kinda fuel pump, converter, rear gears are you running?

Nine Finger 02 Z28

iTrader: (11)

Stock fuel pump,a custom converter 3500 stal,and 4.10's on 28x10.5 15 ET Drags.

whiteLS1

iTrader: (15)

nice times.

i saw a guy at a track near me go 10.3** at 135 with a six speed on the stock rear end.

Matt

WS6snake-eater

What weight mods do you have? How about other suspension stuff? LCA's, TQ arm, anything?????

Nine Finger 02 Z28

iTrader: (11)

Sent you PM.

1bad346Z28

That's amazing..are you using a wet kit or dry?

2002_TAWS6

Whats the A3?

I assume its either a typo in your sig or you have a different tranny?

Interested to hear about suspension mods as well.

By the way, "WOOOOOOOOOOOOOOOOOOOOOOOWWWWWWWWWWW!!!"

Congrats.

Nine Finger 02 Z28

iTrader: (11)

I have a wet kit that I put together,NOS Cheater sylinoids,NX Shark Nozzle,and Compucar and NOS Bottles.Jetting is .52 NOS and .35 Fuel.Bottle Pressure at 950-1050 psi.

Nine Finger 02 Z28

iTrader: (11)

An A3 is a Automatic 3 Speed trans. and no that is not an Typo.I have a TH350 trans.

Suspenion mods consist of Hal shocks all of the way around with the front springs,Chrome Moly K Member and A Arms,and a Spohn Torque Arm.
Thanks

SS GIRL

that is a nice 60-ft, i wish mine were like that...