Suspension & Brakes Springs | Shocks | Handling | Rotors

LCA angles how much?

Thread Tools
 
Search this Thread
 
Old 11-17-2003, 05:50 PM
  #1  
TECH Fanatic
Thread Starter
iTrader: (2)
 
destroyerSS's Avatar
 
Join Date: Dec 2002
Location: Orange county n.y.
Posts: 1,107
Likes: 0
Received 0 Likes on 0 Posts
Default LCA angles how much?

I have my SS lowered 1.5 inches and when i look at my LCA's there angeled the wrong way instead of the front of the LCA being higher it's lower. So my ? is how much is this affecting my launch at the track and how much improvement will i feel with LCA relocation brackets. I have hotchkis LCA's and panhard bar and nitto DR's but i can still only get 2.0-2.2 60 ft's with a best of 1.910
Old 11-17-2003, 05:59 PM
  #2  
TECH Senior Member
iTrader: (4)
 
trackbird's Avatar
 
Join Date: Oct 2002
Location: OH
Posts: 5,110
Likes: 0
Received 3 Likes on 3 Posts

Default

1.9 is not bad, actually, 2.0 are not bad (IMHO). But, relocation brackets will probably work very well for you. I suspect that you'll break the rear not long avter they go on.

Good luck!
Old 11-18-2003, 06:03 PM
  #3  
TECH Fanatic
Thread Starter
iTrader: (2)
 
destroyerSS's Avatar
 
Join Date: Dec 2002
Location: Orange county n.y.
Posts: 1,107
Likes: 0
Received 0 Likes on 0 Posts
Default

i hope that they work because as of now when i launch i have try to ease off the line then i'll roll into the throttle and i'll still break the tires loose. i just want to be able to dump the clutch even if it's only at 2500-3000 rpm's and get a good bite.



Quick Reply: LCA angles how much?



All times are GMT -5. The time now is 07:16 PM.