Western Members - Time to hit the shop

since im working a good job now i think its time i get the engine and trans rebuilt...any ideas of what i should add to the car ?

What are your plans with the car? I'd go full bolt-ons and a cam. CMS motorsports is right by you. They can take care of all you performance needs and rebuilds.

were are they located

were are they located

dude he is soo fucken close to u, go with CMS!\\


http://cunningham-motorsports.com/

were are they located

31947 Corydon St #120
Lake Elsinore, CA 92530

Ditto... Check out CMS. They are close to you and they know their stuff.

I would do a full all out stroker motor (if its not a daily driver). Btw what do u have a auto or manual? And ohh yea there's a guy in the classified selling a built 383 ls1 check it out.

i have a auto w/ a shift kit...does the job for mee...

Fully forged 408 LQ4 stroker with a F1-A strapped to it...;) You never stated your budget. :D

any one care to notice he has an LT1? he said rebuild not swap :lol:

any one care to notice he has an LT1? he said rebuild not swap :lol:

Body style is a LT1, but with no sig info, who knows what engine he has or wants. ;););)

OP, I can answer any of your LTx questions, if that is in fact what you have.
I even have a nice cam for you to use. :D

hmmm nice idea..i was just thinkin a cam since i brought the car with this one and dont kno the lift or anything

First and foremost...what's your budget?

A shift kit only trans is not gonna last.

my budget as of right now is about 3 thousand...

my budget as of right now is about 3 thousand...

Well that is enough for a nice heads and cam package from Ai.

http://www.advancedinduction.com/AiProductsLT1.html

Give them a call and they can ship you out one of the baddest LTx heads/cam packages around. That will cost you a hair under 2k.
To get the most out of that package you will want a stall and gears though, which is out of your budget.

What is your mod list right now? For 3k you might be better off buying a nice stall, tranny cooler, 3.73 rear end gears, and some supension mods with whatever's left. That will make your car a totally different animal.

when i brought the car dude said it had some 373s ,a suspension & a cam but couldnt give me any info on it at all...

i know for a fact it has a shift kit,headers,throttle body, and a cold air intake


keep in mind im only 19 so i saw this car as a come up for 900..and it was running

when i brought the car dude said it had some 373s ,a suspension & a cam but couldnt give me any info on it at all...

i know for a fact it has a shift kit,headers,throttle body, and a cold air intake


keep in mind im only 19 so i saw this car as a come up for 900..and it was running

Hell of a deal!

If you let me check it out some time I can tell you everything it had externally. I can even pop off one of your valve covers and tell you if you have any vlalve train upgrades.

ok well once i get it out here im going to hit you 1st...its still in los angeles at my step fathers...rather drive my gas saver around

Fully forged 408 LQ4 stroker with a F1-A strapped to it...;) You never stated your budget. :D

:drool::drool:

give us a call we can take care of you