JASON11WS6

iTrader: (7)

Hey, guys. I have a six rib and I am looking to upgrade to the 8 rib system soon. Everyone has told me I must use a ATI balancer which is fine but the question is which freaking one do I need.....They make like twenty of them for f bodies according to summit. I plan on pulling the A/C soon so I was thinking I would get one without the a/c pulley. I was also thinking I could get a underdrive pulley as well. Any ideas?

BriancWS6

iTrader: (18)

Your best bet is to contact Bob@EPP. He has what you need and can answer your questions.

Aster

iTrader: (9)

With forced induction I would recommend against using an underdrive pulley. The water pump will be flowing less coolant as a result which could lead to cooling issues.

JASON11WS6

iTrader: (7)

I planned on going with a electric pump down the road.

EPP

iTrader: (22)

Thanks, I appreciate it!

http://www.exoticperformanceplus.com....html?item=716
ProCharger 8 rib upgrade kit

http://www.exoticperformanceplus.com...html?item=1899
Balancer that ProCharger recommends to use with their systems. ProCharger use to recommend the 917242 balancer, but ATI Performance Products quit drilling the needed bolt holes for the ProCharger crank pulley in the outer shell of the 917242. The 918853 is now the balancer to use. Bob