Pulling Motor Question (C5)
07-28-2009, 02:24 PM
#1
TECH Regular
Thread Starter
iTrader: (18)
Join Date: Jun 2006
Location: Houston, TX
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
Pulling Motor Question (C5) I am returning my car back to stock and since I have the exhaust, heads, intake, etc. off already, I figured I would pull the block and have it freshened up.
Questions:
Can I pull the motor from the top without dropping the rear, torque tube, trans etc.?
I am also wanting to replace the clutch while the motor is out. Once again, can I do this without actually dropping trans and all the other things attached.?
Thank you for your time and help.!
J.R.
Questions:
Can I pull the motor from the top without dropping the rear, torque tube, trans etc.?
I am also wanting to replace the clutch while the motor is out. Once again, can I do this without actually dropping trans and all the other things attached.?
Thank you for your time and help.!
J.R.
07-28-2009, 02:29 PM
#2
Yes look on corvetteforum I think the guys name is cajundude but he has a step by step of how to do it. It's what I did but it was a major pita especially getting it back in.