Huge Thanks to LG Motorsports
07-30-2009, 09:10 AM
#1
12 Second Club
Thread Starter
iTrader: (3)
Join Date: Apr 2006
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Huge Thanks to LG Motorsports I live in the dallas area and had some issue's with my 99 C5, i took it to LG yesterday and they helped me out with what was wrong. I took the car out last night and it is completely different to me. Even my best friend thougth it had a little different manners. So did the turbo civic that would not stop messing with me. Thanks LG and the crew there you guys rock and are total professionals.
07-30-2009, 04:20 PM
#3
12 Second Club
Thread Starter
iTrader: (3)
Join Date: Apr 2006
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
I had some issues with the tune. I have a cam and a previous shop set the fuel shut off/rev limiter at 6400 rpm and the cam made peak powe at 6300 to 6400. I was having to shift early and loosing power. So they set it at 6700 rpm. They also looked at the tune and check fuel and drivability. They also hooked up my air bridge and dynoed the car.
07-30-2009, 04:52 PM
#5
TECH Fanatic
iTrader: (27)
Join Date: May 2004
Location: DFW
Posts: 1,597
Likes: 0
Received 0 Likes
on
0 Posts
Who the heck sets the rev limiter at 6400 rpms? Was it having KR issues in the upper rpms and as a band aid they set the limiter low?
Curious to see the “said” shop is. Feel free to PM if you don’t want it public.
Curious to see the “said” shop is. Feel free to PM if you don’t want it public.
07-30-2009, 05:55 PM
#6
12 Second Club
Thread Starter
iTrader: (3)
Join Date: Apr 2006
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
It put 399.1 rwhp and 376.X rwtq. I am very happy based off of my set up and having no heads the cam is a 224 228 588 581 lift 114 cam. It pulled all the way to 6400 and no kr at all. The worst part about the "said" shop was I knew about the problem asked them to fix it and they said they did. That is when LG helped me out and were just nice guys. I am fixing to go overseas and they treated me right so when I get back I am going back for more parts.
Trending Topics
07-31-2009, 08:57 AM
#10
On The Tree
iTrader: (2)
Join Date: Oct 2006
Location: Denton, Texas
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
It put 399.1 rwhp and 376.X rwtq. I am very happy based off of my set up and having no heads the cam is a 224 228 588 581 lift 114 cam. It pulled all the way to 6400 and no kr at all. The worst part about the "said" shop was I knew about the problem asked them to fix it and they said they did. That is when LG helped me out and were just nice guys. I am fixing to go overseas and they treated me right so when I get back I am going back for more parts.