Big Mike

iTrader: (4)

Exactly what the subject says!!

Thanks!

LS1LT1

iTrader: (16)

It's not easy from what I understand, dash might have to come out.
Take the glove box door off/out (that's easy) and look under there, maybe there's another way?

SilverGhost

iTrader: (53)

Not sure if you can do it without taking the dash off..I did because I was removing airbags, heater/vents, etc all at the same time..

quickWS6

I don't see how you can do it without removing the dash. Removing the dash is really very easy, just unbolt everything.

GeorgeC

My best advice would be to pick up a Helm's manual for your car...

The easiest way is to remove the entire dash from the car. It's not terribly difficult, but I wouldn't call it "easy," either...

DERTY

Remove the dash then remove it on the ground. It's pretty well wedged in there behind the blower motor. It was considerably quicker to just take the dash out then to figure out how to squeeze it out. Just have fun getting that center screw out from behind the passenger side cylinder head!

Big Mike

iTrader: (4)

You guys are discouraging me!

I'm going to let the roll cage installer take care of it! I figured what the heck, the dash has to come out anyway!

mike m

iTrader: (6)

just smash into a tree it'll pop right out.

LS1LT1

iTrader: (16)