16" drag setup
#1
TECH Fanatic
Thread Starter
iTrader: (2)
Join Date: Mar 2009
Posts: 1,139
Likes: 0
Received 0 Likes
on
0 Posts
16" drag setup
Like the title says I've been looking for a drag setup based around a 16 inch wheel. Ive searched and the only things i come up with are either widening stock wheels are the CCW wheels that are kinda pricey. All the threads i looked at where a couple years old and I was wondering if there was anything new out there that you guys are using.
I like the billet specialties F bodies, but is there anything else that i could use without grinding the caliper?
I like the billet specialties F bodies, but is there anything else that i could use without grinding the caliper?
#5
LS1Tech Co-Founder
iTrader: (34)
You can run 15" Bogarts front and rear, and they do not require grinding. If you buy them used you can avoid spending $1700 for a complete set.
At one time I ran 16's in back, but there was not weight savings.
In the following pic, circa 2000, I ran 16x8's in back and 15x3.5's in front, fronts had a spacer:
At one time I ran 16's in back, but there was not weight savings.
In the following pic, circa 2000, I ran 16x8's in back and 15x3.5's in front, fronts had a spacer:
Trending Topics
#8
TECH Fanatic
Thread Starter
iTrader: (2)
Join Date: Mar 2009
Posts: 1,139
Likes: 0
Received 0 Likes
on
0 Posts
If you cant post where the good prices are please send a PM i would be real grateful.