Dyno #s with 100shot
#1
11 Second Club
Thread Starter
Join Date: Mar 2006
Location: Tualatin, OR
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Dyno #s with 100shot
Hey guys. Installed some LTs and TDs a couple of weeks ago on my 02 Z-28, stock stall and 3.70 gears. Got it all tuned and thought I'd post some numbers for you. HSW Sudden Impact wet kit with it jetted for 100hp, made 430hp and 450tq. I'm extremely pleased with this system. It puts down what it advertises and ran as low as 11.48 once. Haven't ran it at the track yet because I don't have a rollbar. Just thought I'd share and tell HSW thanks for a great product. I've seen more than a few f-bodys at my local track with other kits (similar mods) not run nearly as well. If anyone else wants to post up some numbers feel free.
Eric
Eric
#2
TECH Resident
iTrader: (6)
It puts down what it advertises and ran as low as 11.48 once. Haven't ran it at the track yet because I don't have a rollbar.
#3
man screw that roll bar. go to a different track (if one is local) and get some times. I know its hard to wait to run after some new mods.
Your track most be tight on the rules, I've seen cars on here run 10's with no bars.
Your track most be tight on the rules, I've seen cars on here run 10's with no bars.
#5
11 Second Club
Thread Starter
Join Date: Mar 2006
Location: Tualatin, OR
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
It ran that time with stock manifolds, full weight. Only mods were lid, catback, gears, rear suspension, 16" drag radials and nitrous.
Yeah, most of the tracks around here are pretty picky. We even have decibel limits. I'm gonna try to make atleast one pass on juice but I can't do it too often. Nitrous doesn't play well with my stock tranny. I already broke one and I'm pretty sure its hurt my current one. Oh well, I'll put a stall and built trans in and shoot for 10s.
Eric
Yeah, most of the tracks around here are pretty picky. We even have decibel limits. I'm gonna try to make atleast one pass on juice but I can't do it too often. Nitrous doesn't play well with my stock tranny. I already broke one and I'm pretty sure its hurt my current one. Oh well, I'll put a stall and built trans in and shoot for 10s.
Eric
#6
FormerVendor
iTrader: (6)
Join Date: Nov 2007
Location: Glenolden, PA
Posts: 1,593
Likes: 0
Received 0 Likes
on
0 Posts
Glad to see your kit is performing well and got you the results you were looking for. Once you get the tranny rebuilt, make the nitrous your last pass of the night. Wolfe usually has a good deal on a bolt in 6pt rollbar around christmas time so id look into that as well.