98TA6.0
09-04-2009, 05:23 PM
hey guys my name is Jason and i'm moving here from Hawaii. well originally i'm from Texas. i here in Jacksonville for a little while and thought i'd introduce myself to the Florida F body crowd. i drive a Navy Blue Metallic 1998 Pontiac Trans Am. just made the 1100 mile roadtrip from Dallas, which was all break in miles for the motor and rear. here's a little bit about the car
1998 NBM Trans Am
-motor
iron 364 ci with Wiseco Forged Flat tops and Compstar rods
Magic Stick 3 camshaft
CTS-VR lifters
TSP chrome moly pushrods
Yella Terra ultra lites
ported and bowled 243 heads with Isky double valve springs and titanium ret
TSP ported FAST 92mm with a ported PTM 95mm TB
FAST fuel rails
Racetronix 42 lb/hr injectors
TSP 1 7/8 coated race style LTs with an ORY and Hooker catback
QTP electric cutout
Powerbond UD pulley
FTP 85mm lid and 85mm SLP MAF
Racetronix fuel pump with hotwire kit
-drivetrain
Monster Stage 5 clutch with chrome moly flywheel
SUPER HIGH MILEAGE T56 (any recommendations for a rebuild place?)
PST 3.5" chrome moly driveshaft
Moser 9" 31 spline with 4.33s and a True Trac
-suspension
BMR chrome moly adjustable panhard bar, torque arm, and LCAs
Spohn weld-in subframe connectors
1LE springs
KYB AGX shocks
EBC drilled and slotted rotors
Hawk Red Stuff pads
UMI driveshaft loop
here are some pics
http://i184.photobucket.com/albums/x65/firebird84350/DSC00454.jpg
http://i184.photobucket.com/albums/x65/firebird84350/100_1214.jpg
1998 NBM Trans Am
-motor
iron 364 ci with Wiseco Forged Flat tops and Compstar rods
Magic Stick 3 camshaft
CTS-VR lifters
TSP chrome moly pushrods
Yella Terra ultra lites
ported and bowled 243 heads with Isky double valve springs and titanium ret
TSP ported FAST 92mm with a ported PTM 95mm TB
FAST fuel rails
Racetronix 42 lb/hr injectors
TSP 1 7/8 coated race style LTs with an ORY and Hooker catback
QTP electric cutout
Powerbond UD pulley
FTP 85mm lid and 85mm SLP MAF
Racetronix fuel pump with hotwire kit
-drivetrain
Monster Stage 5 clutch with chrome moly flywheel
SUPER HIGH MILEAGE T56 (any recommendations for a rebuild place?)
PST 3.5" chrome moly driveshaft
Moser 9" 31 spline with 4.33s and a True Trac
-suspension
BMR chrome moly adjustable panhard bar, torque arm, and LCAs
Spohn weld-in subframe connectors
1LE springs
KYB AGX shocks
EBC drilled and slotted rotors
Hawk Red Stuff pads
UMI driveshaft loop
here are some pics
http://i184.photobucket.com/albums/x65/firebird84350/DSC00454.jpg
http://i184.photobucket.com/albums/x65/firebird84350/100_1214.jpg