Support mods for larger cam
09-05-2009, 10:11 PM
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Aug 2009
Location: FRIENDSWOOD TX
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Support mods for larger cam Ok guys excuse my ignorance but I'm curious about this....after reading some threads people have made it sound like if u step up to a pretty large cam, you're gonna need bigger fuel injectors. Is this correct or am I misreading it and one has nothing to do with the other?
09-05-2009, 10:51 PM
#2
TECH Apprentice
iTrader: (10)
Join Date: May 2008
Location: Odessa, Texas
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
If you are making more power you are going to be using more fuel, which means your injectors are going to be working harder.
You will be close to/or max out the stock 26lb/hr injectors in a large cam-only application most of the time. Just make sure and tell whoever tunes the car to pay attention to the injector duty cycle % and tell you what it's at.
You will be close to/or max out the stock 26lb/hr injectors in a large cam-only application most of the time. Just make sure and tell whoever tunes the car to pay attention to the injector duty cycle % and tell you what it's at.
09-05-2009, 11:48 PM
#4
Yes, you need to upgrade the FI's. You can potentially leave more power on the table if you don't. I've seen from other post you want to use an MS4. I would recommend some 37#. That way of you do heads down the road, you still have a cushion but not too much.
