Gen 5 Camaro Internal Engine Tech - Pre-Fab line locks for 5th gens?

Does anyone know of someone that's making a pre-fab line lock kit for these cars. I have done many custom line lock setups, but I would rather have one that looks like it belongs in the car with well thought out pre bent lines & good wiring? Something like the SJM kit I have on my 4th gen is what I'm looking for.

Off the top of my head I would say look at SJM. Their kit looked stock on 4th gens. I dont know if they have a 5th gen or not yet.

I checked SJM, like I said in my post, I have their 4th gen kit. I'm sure he will be the 1st person to make one. I will give him a call today. I have everything to put together a line lock at home all brand new, a Hurst Line Lock and Summit install kit with all of the tubing, it's for my 91 GMC that I'm doing a sprayed 5.3 swap in, but if worse comes to worse, I'll put it together in my 5th gen. I never liked dumping the clutch & hitting the brakes to do a burnout. I need something before the LSx Shootout. ;)

I know SJM is working on a kit and we will post as soon as we get word on them.

We are currently working on them. I should have them available shortly.

Steve, are you going to try to get Bogart to make some good drag rims that will clear the Brembo's on our cars?

Steve, are you going to try to get Bogart to make some good drag rims that will clear the Brembo's on our cars?

Yes, we are finalizing this as well:-).

:secret2:

:secret2:

Are my secrets safe anywhere. ;) Wonder who else know's some of my setup due to posts on here & other boards.

If certain other people are seeing this from the Croo on the coast, I will also be running DRAG RADIALS, that's because I will be DRAG RACING, not ROLL RACING. You no driving bastages!!!!!!!!

Austin I know you DRAG Race so this is not aimed at you. ;)

Oct 4-11 DRAG RACING at the TRACK on the Coast, OCT 15-18 DRAG RACING at the TRACK IN MEMPHIS. Fuggin spies are everywhere trying to find out my setup. :engarde: