boola1341

iTrader: (1)

Has anyone wanted to be able to lockup your stalled converter when you wanted too instead of the computer doing it for you? Is it possible to wire a switch somehow so I could flip the switch to lockup the converter. At times the converter locks up way to fast. This is just a thought.

calongo_SS

iTrader: (7)

Yes you can have a switch, but most only use it for WOT with a multi disc converter.
If it is locking before you want to just driving around town you need to do some tuning.

performabuilt

iTrader: (25)

You can put a switch on it however even for that you would have to do some tuning of you would set a code. Best bet is as mentioned to just make some ajustments in tuning to raise the lockup point

01ssreda4

iTrader: (96)

Very good advice...........

boola1341

iTrader: (1)

Ok thanks.