xRelapse13

iTrader: (21)

Anyone here have a fab 9 from MWC with a custom watts link set up? How do you like it, and any pictures?

T/AWS6969

I would be very interested to know as well!!

69TA

iTrader: (263)

there is guy on here with a green ta that has one

Big Bird WS6

iTrader: (9)

i should have one in about a week.

also Awake455 has one.

http://www.cardomain.com/ride/2063127/3

^^^ that is his car page.

xRelapse13

iTrader: (21)

thanks alot man, lemme know how you like it when you get, and make sure to take pics of that beast.

Big Bird WS6

iTrader: (9)

i will. i cant wait to get mine done. i went with the 35 spline wavtec also. i am going to see how good the warrenty is. doing 6K rpm dumps, i will find out fast

T/AWS6969

Ahhh yes i want pics as well!!!!!!!!!!!!!!!!!!!!!!!

xRelapse13

iTrader: (21)

nice, thats exactly what im planning to go, custom watts and wavetrac with 3.90s and i'll be happy as can be

69TA

iTrader: (263)

here you go
http://www.cardomain.com/ride/2146367/10

pictures from member:
GrnDragon

it's his car
https://ls1tech.com/forums/wheels-ti...e-minitub.html

btw what's the big deal about having a watts set up?
is it for drag racing or road racing?

xRelapse13

iTrader: (21)

superior to a panhard bar in centering rear end and keeping it more stable for handling and comfort purposes. I'm running one right now on my ten bolt

Slvr00Bird

iTrader: (2)

Anyone seen any pictures of this unicorn yet? On a backbraced mwc?

69TA

iTrader: (263)

The factory gas tank and exhaust would probably get in the way of a backbraced watts set up.

I guess anything is possible if you put enough effort into it.

Slvr00Bird

iTrader: (2)

I don't see why it would be any different, beside the brackets that mount to the axle tubes. That's assuming it uses the panhard bar mounting locations.

Aaaand Eric said this in his thread. I'm just trying to get a look at one, braced or non but preferably braced..

Big_Bird_WS6

iTrader: (7)

i just talked to eric last friday. there laser was down. so mine is just waiting on laser parts. he is hoping to ship mine out this friday. then i will have pcitures.

Slvr00Bird

iTrader: (2)

That'll be great!!! Is yours backbraced?

Big_Bird_WS6

iTrader: (7)

yes
-----------------------------------------------------------------
Midwest Chaise Fab 9” rear end and Torque arm for 98-02 F-body


Base rearend package w/o spring mounts... .
(iron 3rd member, posi, 31 spline axles, studs, bearings)
- Add backbrace...
- 4ch abs...
- new gm brake plates...
- black powdercoat...
- transverse shock mounts for c/o...
- Moser thru-bolt alum case...
- 3.0gear...
- Upgrade Wavetrac 35 spl diff...
- complete assembled rearend...
- bolt-in Watts link assy
- Strange c/o rear single adj. shocks and Hypercoils
---------------------------------------------------------------------

^^^ that is what i ordered

Awake455

A few more pics added. I should be getting under it in a few days to do some tinkering so I'll try to get some more pics.

As far as how I like it...I don't do much if any straightline. For road courses and the deserted 2 lane blacktop I was truly impressed at the difference this made over a phb (admittedly a stock phb as I sold my good one before installing this). The car feels a great deal lighter and more responsive. That being said, if you are doing street strip I kinda think you could save yourself the complexity and just run one of his phbs and be great.

Given the rod ends everywhere on this suspension I am impressed at how quiet it is. Gear noise is nil. Suspension noise a few ppl notice but I am more than willing to deal with that minimal bit of noise for how great the car responds now. Only place it is that audible are horrible roads.

Slvr00Bird

iTrader: (2)

Bump..

Big_Bird_WS6

iTrader: (7)

sitll waiting on rear.

Slvr00Bird

iTrader: (2)

Bump...