carbom fiber berger panel?
09-27-2009, 09:45 PM
#1
Launching!
Thread Starter
Join Date: Dec 2007
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
carbom fiber berger panel? wooops i meant "carbon fiber berger panel"
i wanted to do something to my berger panel but my car is black and it dosent look to good goin flat black . and semi gloss would look kinda off . so if any shop made them from real carbon fiber for a 98-02 z28 or if thers a write up on them let me know thanks
where can i get one ?
do i have to make one my self?
where can i buy raw carbon fiber to make it ?
if thers a place that makes them, do they have them with the key hole shaved and camaro lettering shaved aswell ?
i seen one a long time ago on a black ss but it was on the road .
i wanted to do something to my berger panel but my car is black and it dosent look to good goin flat black . and semi gloss would look kinda off . so if any shop made them from real carbon fiber for a 98-02 z28 or if thers a write up on them let me know thanks
where can i get one ?
do i have to make one my self?
where can i buy raw carbon fiber to make it ?
if thers a place that makes them, do they have them with the key hole shaved and camaro lettering shaved aswell ?
i seen one a long time ago on a black ss but it was on the road .
Last edited by _916ls1z28_; 09-27-2009 at 09:55 PM. Reason: spel
09-28-2009, 12:32 AM
#4
TECH Fanatic
iTrader: (2)
Join Date: Apr 2008
Location: Born/Raised North East, MD Lived in VA, NC, MI Back in Yorktown, Va
Posts: 1,170
Likes: 0
Received 1 Like
on
1 Post
talk to 6LEATER << or something along the lines of that. he does alot of good body work on fbodys he might throw sometihng together
09-28-2009, 01:33 PM
#10
Launching!
Thread Starter
Join Date: Dec 2007
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
09-28-2009, 03:25 PM
#13
I am actually dropping off a panel to be molded today. We'll be offering it in fiberglass (already "Berger'd" in satin black) and CF.
We'll also be offering it WITHOUT the CAMARO letters (just shaved) in both finishes.
We could easily offer it without the key hole as well.
This is all tentative, I'm going to get pricing first because I know if this ends up being an expensive piece no on would buy it when you can do it to your own...
We'll also be offering it WITHOUT the CAMARO letters (just shaved) in both finishes.
We could easily offer it without the key hole as well.
This is all tentative, I'm going to get pricing first because I know if this ends up being an expensive piece no on would buy it when you can do it to your own...
