Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

Some success at last with n20

Thread Tools
 
Search this Thread
 
Old 09-29-2009, 06:29 PM
  #1  
Launching!
Thread Starter
 
vettewrench's Avatar
 
Join Date: Mar 2009
Location: new jersey
Posts: 237
Likes: 0
Received 0 Likes on 0 Posts
Default Some success at last with n20

Took the corvette to the track on spray and had some good results. 9.68 @ 145 - 1.42 60 ft . 6 months ago we hurt a motor on the dyno and had to start over. Alot of you guys on this forum gave us some good advice to help us move on and get down the track . Thank you for that !! In 3 more weeks heading back to the track with coil overs,28 inch hoosiers and hopefully 100 % of n20 out the gate ! Tune up still soft so were going to creep up a little bit on it and then add some more jet. We did the above # with 28 n20 jets. Once again -thanks again to all

special thanks to ed hutcings from virginia speed -hes a super tuner !!!!!

Last edited by vettewrench; 09-29-2009 at 06:51 PM. Reason: spelling
Old 09-29-2009, 10:14 PM
  #2  
TECH Fanatic
iTrader: (2)
 
MelScrilla's Avatar
 
Join Date: Mar 2009
Posts: 1,139
Likes: 0
Received 0 Likes on 0 Posts
Default

sounds like your on the way. The only bad thing is in Jersey the racing season is about over at the end of October, I lived there for 19 years and I remeber going to Englishtown in October with heavy jacket, gloves, and a knit hat on.

You need to head south and get some passes in into the winter so next season you'll be running with the 275 big dogs.
Old 09-29-2009, 10:33 PM
  #3  
8 Second 6 Speed Director
iTrader: (6)
 
taner's Avatar
 
Join Date: May 2002
Location: windsor, ont. canada - Home of the fastest LT1 6spd.
Posts: 3,293
Likes: 0
Received 1 Like on 1 Post

Default

congrats, cold days are some of the best days!

windsor is no better! and at least you have elevation working even more for you!
Old 09-30-2009, 04:31 PM
  #4  
Chris@NitroDaves
Guest
 
Posts: n/a
Default

Good luck on the quest

Once you get that thing dialed in it's going to fly




All times are GMT -5. The time now is 08:59 PM.