AFR not scanning
#1
TECH Enthusiast
Thread Starter
iTrader: (4)
Join Date: Jul 2004
Location: GA
Posts: 720
Likes: 0
Received 0 Likes
on
0 Posts
AFR not scanning
I cannot get my AFR #s on the HPTuners computer scan to agree with my innovate hand held and the onboard AFR gauge. I have hooked it up using the white wire on #1 and ground on #5.
The odd thing is that although the hand held and mounted gauges seem to read correctly, the scan on HP doesn't vary more than approx. .6 (example 14.2-14.8)
What can I do to get the scan read accurately so I can start turning
The odd thing is that although the hand held and mounted gauges seem to read correctly, the scan on HP doesn't vary more than approx. .6 (example 14.2-14.8)
What can I do to get the scan read accurately so I can start turning