1BADAIR

iTrader: (1)

broke my 12 bolt again. What 9inch should I look at. I like the MWC/ fabbed types or M9 but I can't use one with the TA bracket on top of the diff due to the car being low.

Intercooler2

iTrader: (24)

You mean lowered? I am lowered 1.25". I have the MWC unit and don't think you can get better.

No problems hitting at all

wrd1972

iTrader: (12)

MWC is bad *** man. Cant reccomend it enough. Call Eric and discuss the TA issue with him.

LS1RedZ

iTrader: (19)

Damn.. What kind of power are you putting down? Just curious because I have a 12 bolt and Im at about 700rwhp right now and a 6 speed.

mrbigjeep

yeah your gonna need to switch to a ford rear end

1BADAIR

iTrader: (1)

if it hooks it will break. I am not making anywhere near that power
broke this time on a 1.55 60. The last time I broke the pinion , spiders and carrier.
this time it broke a pro ring gear with a spool in it

1BADAIR

iTrader: (1)

i love that axle but I know Vos and mightmouse have problems with them hitting. MM cut out above his. Vos just raised his car

EPP

iTrader: (22)

I don't know if the Moser M9 will clear any better than the MWC, but here are several pictures of it .



The standard Moser 9 inch rear will rub too, although a little added clearance can be had with a pry bar shoved between the torque arm bracket and the floor. Bob

1BADAIR

iTrader: (1)

I think I am gonna end up with a standard housing.
or I may keep the 12 bolt and put a 4l80 in it

86 IROC

iTrader: (14)

What about an S60? Originally I was thinking 12 bolt for my car, but posts like this make me think an S60 would be better for longevity.

1BADAIR

iTrader: (1)

race weight is 3950. Thats one reason I kinda wanted a fabbed so it would be lighter. S60 would be even heavier

Intercooler2

iTrader: (24)

3950? Wow! I thought mine had the title for heaviest car racing. You hauling a fat heffer around in the back seat? LOL

1BADAIR

iTrader: (1)

broke on a pathetic 1.55 60 too. normally goes 1.4's
i did get a nice pic though

dschmittie1

iTrader: (64)

Mightymouse is not running the standard MWC torque arm setup that is why he is having problems with clearance. Mine is lowered and does not hit at all. I love my MWC fab rear plus it weights less than my 10 bolt did.

1BADAIR

iTrader: (1)

any pics of the standard one then? everything I have seen is like his