turbov6bryan

I need the following parts:

Ok , have a 1998 camaro with neutral leather interior

The drivers side seat, mine is a power seat, and my seat is torn where the bolster pushes out.

Whole seat, or just the back side of it


Factory rear axle bump stops, these bolt to the sub frame and keep the axle from coming up too far. Mine are black with a aluminum base. I believe they are a few inches thick.


5 silver lug nut covers napas grey ones are way too dark

rear hatch panels, i need 3 tan thumb screws, and one of the black rubber pads they screw into. Need to be really nice, someone used a jack hammer to get my screws out.

Clear front side markers

Let me know if you can help
turbov6bryan@live.com

turbov6bryan

Bump

BW

uphigh07

iTrader: (48)

i have a 2002 trans am with tan everyting i am in kansas i have the hatch panels and the tan thumb screws you are talking about. pm me

turbov6bryan

I just need the 3 thumb screws, the hatch panels are fine.

Im at 66212, where are you at? I know you said PM, but sorry.

Thanks
BW

turbov6bryan

Anyone have the parts i am looking for?

kclskgl

iTrader: (21)

I've got the seat good condition. Bolster is great. http://s196.photobucket.com/albums/a...l/ls1%20parts/

turbov6bryan

Very nice, how much for you to ship the upper and lower drivers skin side to 66212

And or just the drivers side upper skin its what i need the drivers side outer skins

my email is turbov6bryan or call me with you best deal 913 888 4899
Bryan

kclskgl

iTrader: (21)

I want to sell the whole seat. If you want to pay for the whole seat, i will take the skins off. Whole seat 300.00 shipped ,Skins 250.00 shipped.