sschoeffler

iTrader: (24)

Ok I have a Holley 90mm TB and running the stock 2000 MAF and a 3 inch inlet/outlet intercooler. What couplings am I going to need to make it all work? I bought an intercooler kit with pipes and everything off ebay but I know its not going to hook up to my intercooler. What sizes am I going to need and in what shapes?

ChevyChad

iTrader: (50)

The TB is 4", and the MAF is 3.5" diameter. You will need to figure out exactly how you want to run your piping before you can figure out what couplings you need. I bought all of my couplers and t-bolt clamps from siliconeintakes.