4SFEDZ

iTrader: (6)

2nd time out with the car! starting to get it dialed in, def got more in it! on the last run i set the 2-step to 3400 and let her rip! had a hard time to get it to stick, but a little vht helped! im amazed that this converter is working as good as it is!

60' 1.459
1/8th 6.282
mph 112.31

so being a lt1 with opti, stock comp and stock casting heads im very happy! i think it will go 5.9x as it sits with this lil ole s475 on pump!

Reject

iTrader: (24)

thats impressive, got a build thread i can check over? i know the LT1 heads are known for the awsome lack of airflow

Jon@BruteSpeed

iTrader: (3)

I would like to know more as well.

kikass_z28

quite impressive, congrats

reamo04

iTrader: (9)

very nice, guy over on cz28 is running 108 in the 1/8th on his LT1 with ported heads and a custom cam.

He has a t78 IIRC.

Those s475s are beasts.

4SFEDZ

iTrader: (6)

the heads were done by lpe and pretty much ported to the max for a stock cast. i was worried bout lifting a head, but so far so good! the cam is a lpe blower cam that is workin quite well. other than that nothin special. 385 4 bolt, cola crank, JE pistons, stock lt1 intake with mild porting, msd 6al and coil, msd 3 step, gm opti, twin log headers to a 2.5 cross over into a s475, 5" dp out the front bumper, large A2A intercooler, th400 w brake, hughs 3k stall, s60 with 3.5x gear, 28" slick, full suspension, and i think the key is the tuning, moe bailey is the man! 93 octane, no meth or anything.

so up next is a A2W and race gas!

4SFEDZ

iTrader: (6)

here is a vid of a 6.3 with a 1.5 60'. iphone vid so its not the greatest!

http://www.youtube.com/watch?v=7v__Z951r8w