cam selection
#1
On The Tree
Thread Starter
iTrader: (6)
Join Date: Oct 2009
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
cam selection
Im in process of doing 6.0 swap in 1996 mustang. Will b using 4l60e and 4000-4600 stall (performa built level2) Car weighed 3450 with ful tank of fuel and me in it. Will have Anthony Jones Kmember tubular arms and coil over shocks. Has 31 spline 8.8 with 3.73s and addjustable upper and lower control arms and adding 10 point roll bar. The weight of finished car car should b close to the same weight. My question is what cam should i use motor is a 2006 lq9 with the texas speed 2.5 ported ls6 heads dynotech full lengh headers and fast ported 92mm intake and throttle body. Will b driven little on the street but driveability not a concern over all. Any help or suggestions appreciated. like to get as much out of car as can with what i already have got