great421

iTrader: (1)

All -

I've had the unfortunate experience of burning out two MAF-based Snow Performance controllers for my Meth kit / pump in the last 3 years.

When they fail, they go from providing a start point, a 100% point, and a smooth ramp between the two points, to a simple ON / OFF switch which bogs my engine when it gets too much Meth.

I've checked my pump's input voltage line, and (as suspected) my second controller from Snow has failed.

Do I have any other MAF-based controller options out there? I really don't want to spend another $200 on a Snow unit which is gonna' fail (again!), but I will if it's my only MAF-based option.

Thanks - MIKE

ninetres

iTrader: (35)

Alkycontrol. Should have went with one the 1st time around.

vipvegas

iTrader: (13)

i have a devilsown and like it. But Julio at Alky is the man.. Top notch service, if I ever ditch this one he will be who I will go with. But my Devils own is nice.

JMitch19

iTrader: (1)

DevilsOwn also just came out with a new second gen unit that you can get with a built on map sensor or you can get it in a standard version. I really like their controller. It is a fully digital unit not analog like most I have seen.

KILLER-LS1

iTrader: (18)

check out painless wiring... they have a kit with a built in MAP sensor so you can control the rate in relation to boost. Thats whats going on my car

great421

iTrader: (1)

Thanks guys - but I'm looking for a Mass Air Flow (MAF) based system, so I don't need to do anything except replace the controller - does anyone (other than Snow) make this type?

LMK!

digitalsolo

iTrader: (24)

Talk to Julio, he has systems that work with a MAF for Ford. His customer service is top notch.