Nitrous Oxide - NX 100hp hit on TR55's?



PDA

View Full Version : NX 100hp hit on TR55's?

rickou812
10-29-2009, 06:08 PM
Would it be ok to run a NX 100 shot (52N 28F) with TR55 plugs, or should I go down a heat range to TR6's?

Thanks,
Rick

Nitro Dave's Nitrous Outlet
10-29-2009, 07:43 PM
No, That is to hot of aplug. The TR^ will work but the BR7EF would be better.
Dave
rickou812
10-29-2009, 07:45 PM
No, That is to hot of aplug. The TR^ will work but the BR7EF would be better.
Dave

How big of a shot could I go to with the BR7EF

Thanks Dave,

Rick

Nitro Dave's Nitrous Outlet
10-29-2009, 07:46 PM
How big of a shot could I go to with the BR7EF

Thanks Dave,

Rick

What is the compression and horse power level of your engine?
Dave
rickou812
10-29-2009, 07:49 PM
What is the compression and horse power level of your engine?
Dave

10.4/1
Runs 100mph in the 1/8. No dyno here in the woods..lol
I figure 550'ish crankshaft
Nitro Dave's Nitrous Outlet
10-29-2009, 07:54 PM
10.4/1
Runs 100mph in the 1/8. No dyno here in the woods..lol
I figure 550'ish crankshaft

I would say about 200 Max.

Dave
rickou812
10-29-2009, 07:57 PM
I would say about 200 Max.

Dave

Appreciate the info Dave.

Thanks,
Rick
Nitro Dave's Nitrous Outlet
10-29-2009, 08:07 PM
No problem
Nick@HSW
10-30-2009, 10:12 AM
There is also a non-projected 6 that might work for you too.

Nick
GMLSX
10-30-2009, 11:14 AM
It cant hurt to be safe. Run the tr6 plugs and just sure the idle and cruise is not to rich.