does this fbody fit an fbody?
#4
FormerVendor
iTrader: (1)
I think that bell might be for a LT1 truck motor. Hard to tell by the picture but they did not make a ls1 in 97. 99 was the last year in a truck for a lt1 bell depending on if your vehicle was equipped with one. You might want to contact the seller and see if it has a bolt hole at the 12 o'clock position. This is the part # from GM. 24206953 Vince
Last edited by FLT; 11-01-2009 at 07:41 AM.
#5
TECH Fanatic
Thread Starter
iTrader: (70)
Join Date: Oct 2005
Location: Los Angeles, California (818)
Posts: 1,219
Likes: 0
Received 0 Likes
on
0 Posts
I think that bell might be for a LT1 truck motor. Hard to tell by the picture but they did not make a ls1 in 97. 99 was the last year in a truck for a lt1 bell depending on if your vehicle was equipped with one. You might want to contact the seller and see if it has a bolt hole at the 12 o'clock position. This is the part # from GM. 24206953 Vince