View Full Version : 99 LPM z/28 Built.. FS/FT


DunnoWhoThisIs
11-02-2009, 03:09 PM
Aright guys.. im in a bad situation here, im on unemployment and they are screwin me out of some checks which i dont get much anyways.. so i am gonna have to sell the car.. i DONT want to at all.. i love this thing and i have my heart and soul into it but you gotta do what you gotta do.. Everything on the car is new.. all parts listed most have less than a 1000 miles, others less than 2000 miles.. ive driven this car about 8000 miles since i bought it in 2008 and when i got it it was BONE stock.. no mods cept a muffler and some mudflaps haha.. here is the mod list:

2005 model 6.0l, Bored .060 Plateau hone (had 6k miles before work done)
Mahle Forged Pistons with Mahle Rings 11.75:1
Legend 6.125" Forged Ultra light I-Beams
Clevite P Series Bearings, all new bearings throughout the motor
Crank is turned .010 on mains, and polished on the rods, race champhered
Balanced and Blueprinted
PRC Stage 2.5 5.3l heads
MS4 Cam
ARP 7/16 Rod bolts
ARP Head bolts
Lingenfelter HV/HP Oil pump
Adj Double Roller Timing Set
All new gaskets, GM MLS Head Gaskets,
LPP new style headers
Edelbrock Vic Jr. intake
Edelbrock Low Profile Elbow
Edelbrock Fuel Rails
Terminator Cobra Injectors
Racetronix F-99 Kit and Hotwire
Ported and Knife Edged TB
Comp Magnum Lifters
Comp Hi-Tech PR's
4.10 Motive gears
Eaton Cone style diff
15.5lb Chromoly Flywheel
Spec Stage 3 Clutch
SLP Pro-Flow, with MAF, Bellows, CAI
Pro 5.0 Shifter
K&N Filter
UMI LCA's, SFC's ADJ PHR, ADJ TQ Arm,
16" 99 style z wheels with nittos
Poly Motor and Tranny mounts
SLP Fan over-ride switch

here is the tranny mods:
All Billit keys
New input shaft
Carbon fiber Synchros
Steel 3-4 Shift fork
All Bronze Shift Pads
new 3-4 Syncho assembly

Suspension mods:
all UMI performance LCA's, SFC's ADJ PHR, ADJ TQ Arm

Car has Polished Alum zr1's on it with Vredestein tires!! forgot to add that.. 17x9.5/11's..

the only thing is it has a 10 bolt in it still, its motive 4.10's and eaton aftermarket style cone diff, but the pinion bearing is shot.. i have the full bearing kit and crush sleeve to fix this i could fix it if who ever wants the car has to have it fixed.. and with the new intake i dont have a hood that fits, im using the stock hood just as a cover until i can source a cowl hood. body and everything is straight, its light pewter metalic, car has 117k on it but like i said the motor has maybe 750 miles on it and the tranny maybe has 1200 miles, everything else has less than 2000 miles. this car is still untuned, so the factory injectors are currently in it, i cant run the Terminators until it gets tuned. it runs like a SOB tho.. holds awesome oil pressure. nothing wrong at all with it. on my sig there is an f-quick link to my garage, you can look at it there as its progressed from stock up until now and pics of the motor as we were assembleing it. let me know what you think i love this car to death and dont really want to part with it but i gotta do what i gotta do.. haha.. if you have any questions my number is 270-564-5377 call me anytime of the day or night.. i want $10,000 for it.. Remember all these parts are new i have over $20k in it..

OH and i have receipts for almost everything!!!

I cannot trade for anything now.. needs to be sold outright.. $10k lowest as i can go on it.. its WELL worth that!!

Price edit: $9,300

DunnoWhoThisIs
11-02-2009, 03:13 PM
oh yea.. ill trade for a turbo car, such as a gsx, tsi, something like that plus cash.. but it needs to be about $3k-$5k in cash! i just want to get out of debt!

Need_a_Camaro
11-02-2009, 03:25 PM
PM sent.

DunnoWhoThisIs
11-03-2009, 03:27 AM
bump guys i have to have some money soon!!

BdaleTA
11-03-2009, 03:33 AM
Ill give you $9000 for it.

DunnoWhoThisIs
11-03-2009, 03:36 AM
man thats a little low for it really.. everything on the car is new..

DunnoWhoThisIs
11-03-2009, 10:00 AM
bump for the mornin crew!!

DunnoWhoThisIs
11-03-2009, 11:57 AM
$10k for it it has to go thats as low as i can sell it, no trades anymore i cant afford it.. if you want it call me at 270-564-5377.. i cant sell it for anything less than 10k.. its WELL worth that!!!!!

DunnoWhoThisIs
11-03-2009, 07:03 PM
bump for night crew!

DunnoWhoThisIs
11-04-2009, 05:33 AM
Bump for the early morning crew!!

REBS-TA
11-04-2009, 07:32 AM
Take a look and let me know if you are interested. Do have a few questions, regarding A/C, P/S, hood and rear-end axel problem... Understand you need $$$ + trade..possible car +3k

http://www.ls1tech.com/forums/vehicles-sale-lsx-powered-only/1200832-89-t-modified-425rwhp-sharp-fs-ft.html

Thanks,
Robby

DunnoWhoThisIs
11-04-2009, 07:45 AM
that is an extremely nice t/a man.. i really wish i could trade now, but i cant.. i have to sell the car out right until i can find a job, unemployment bumped my pay down to nearly nothing a week when it was almost impossible with what i was getting.. the car does not have the a/c on it currently but i have all the a/c stuff to put back on it!! it does have PS.. it will need a cowl hood or maybe cut up a stock hood to make it work im not sure if you can make it fit or not. the rear end just needs a pinion bearing, but the bearing is shot.. i have the complete bearing kit for a 7.5 10 bolt to go in it.. i have not put them in yet i may do so before someone comes to get the car.. i also have the original spoiler as the SS spoiler needs to be painted to match the car!! lemme know guys!!

DunnoWhoThisIs
11-04-2009, 07:19 PM
BUMP!!! need it gone!!!!

DunnoWhoThisIs
11-05-2009, 10:41 AM
Bump fellas... alot of interest!!

DunnoWhoThisIs
11-05-2009, 07:16 PM
bump again!!!

DunnoWhoThisIs
11-06-2009, 09:00 AM
Bump again guys i need this thing gone now!!

DunnoWhoThisIs
11-08-2009, 06:11 PM
Rear end is fixed! quiet as can be!! 10k is a steal on this car if you were to build it again youd spend twice that in parts!!

DunnoWhoThisIs
11-15-2009, 09:06 PM
Bump fellas its still here!!

DunnoWhoThisIs
11-17-2009, 12:37 AM
bump!! $10,000 and its yours!! this is a steal for it!!

DunnoWhoThisIs
11-17-2009, 03:52 PM
Come on guys!!! $9,750 COME GET IT thats as low as i can go!!!!

DunnoWhoThisIs
11-18-2009, 05:40 PM
BUMP!!!!!! i have to get it gone now!!!

boosted4life
11-18-2009, 05:58 PM
So it runs and drives perfectly? Any HP numbers? Why is it not tuned?

DunnoWhoThisIs
11-18-2009, 06:30 PM
yes it runs and drives perfect now.. i dont have it tuned for cause there is no good tuners around here, and i dont have the money to get it tuned.. it doesnt surge, buck, or anything if you dont believe me come see it, i would almost guarantee this puts out atleast 490rwhp if not more.. with a rearend and sticky tires i would say 6.80's, there was a car here that put down 505rwhp 550rwtq and this car would have out ran it and it ran 7.0's.. this motor MAY have 750miles on it and ive wot'd maybe 5 times.. trans is new, all the suspension is new.. i just have to have it gone to get rid of debt so i can move out of my parents house!

boosted4life
11-18-2009, 08:10 PM
yes it runs and drives perfect now.. i dont have it tuned for cause there is no good tuners around here, and i dont have the money to get it tuned.. it doesnt surge, buck, or anything if you dont believe me come see it, i would almost guarantee this puts out atleast 490rwhp if not more.. with a rearend and sticky tires i would say 6.80's, there was a car here that put down 505rwhp 550rwtq and this car would have out ran it and it ran 7.0's.. this motor MAY have 750miles on it and ive wot'd maybe 5 times.. trans is new, all the suspension is new.. i just have to have it gone to get rid of debt so i can move out of my parents house!

I looked at the pics.. does it not have a hood? and whats with the black trunk? has it been painted? Could I maybe get some more pics and some of the interior? Thanks.

DunnoWhoThisIs
11-19-2009, 01:45 AM
its a SS Spoiler, and its black, the trunk isnt black, its pewter. i have the factory spoiler as well.. its pewter but i like the ss spoiler more.. ill get some pics asap but its been raining here lately and nasty so i havent been able to take anymore.. the factory hood wont fit i just use it has a cover to set it on there when im not driving it, it needs a cowl hood. i dont have a hood that will fit it as of right now and i dont have the funds to buy one.. you can cut up the factory hood and make it work but i wouldnt want to do that.. the SS hood that is in the pics does not come with the car i sold it to fund the build. it comes with a factory z28 hood. ill add some more pics off my computer when i get home, im at a friends house right now..

DunnoWhoThisIs
11-20-2009, 04:16 PM
bump again guys!!

DunnoWhoThisIs
11-22-2009, 11:20 AM
Bump!!!

DunnoWhoThisIs
11-22-2009, 10:06 PM
bump if its not sold soon then im gonna put it on ebay!!

DunnoWhoThisIs
11-22-2009, 10:07 PM
oops double post cuz my internet is being gay lol..

DunnoWhoThisIs
11-24-2009, 08:35 PM
BUMP!!! if i dont have a potential buyer in the next couple days its on ebay!! dont miss out on this car!! i have well over what im asking for it in it, and all the parts are new!!

DunnoWhoThisIs
11-25-2009, 10:02 AM
I couldnt wait any longer, Its on ebay now with reserve at $9,750

DunnoWhoThisIs
11-29-2009, 03:17 AM
3 Days and 2 Hours left fellas.. Bid on it!! lol.. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=150392016384&ssPageName=STRK:MESELX:IT

DunnoWhoThisIs
11-30-2009, 03:14 PM
still on there.. 1 day 14 hrs or so..

SlowAss93LT1
11-30-2009, 06:03 PM
Are you willing to trade as long as you get cash out of the deal? I am an avid user on ls1lt1.com with the same name. I have a show quality 93 z28 for trade plus about $4000 in cash. Let me know if you are remotely interested. Email me at andrewporter1987@hotmail.com

DunnoWhoThisIs
11-30-2009, 06:13 PM
man i would but i really have to eliminate all debt until i can get a job to start building something again, and to get completely out of debt i need around $7,000. and most people dont want to give me a car and $7,000 lol.. so i was just going to sell it outright. i appreciate the offer tho!

DunnoWhoThisIs
11-30-2009, 06:19 PM
going to lower the reserve, $9,500

SlowAss93LT1
12-01-2009, 11:30 AM
going to lower the reserve, $9,500

I wish I had a $3k car to trade. I could do my car without the drag wheels + $4500 cash

DunnoWhoThisIs
12-01-2009, 11:41 AM
man i really wish i could, but i need to be completely out of debt, i wish i had other options but as of right now i really dont, the jobs are extremely thin around here and im unemployed making no money at all.. so i need to be completely free of bills until i can get another job.. ive been offered to trade for some really really nice cars but i just cant unless im out of debt..

SlowAss93LT1
12-01-2009, 11:51 AM
I wish the best for you. There is no way for me to trade plus give $7k...

Good luck with the sale and employment.

DunnoWhoThisIs
12-01-2009, 11:59 AM
i appreciate it man!! i wasnt askin for your car and $7k no one in their right mind would want to give a built lt1 plus $7k its just so hard to pass up some of the trades ive been offered but i cant do them because i wouldnt be able to make the payments. ive been offered show trucks, drag cars, real real nice turbo cars, really nice crotch rockets, all kinds of stuff but i just cant.. makes me sad that i cant take some of these ppl up on trades haha.. if i could i def would! haha.. i appreciate your good wishes tho.. i need them haha

DunnoWhoThisIs
12-02-2009, 10:11 AM
Back up for sale on here.. $9,500!! come get it!!.. Thats well below what i started my price out and lower than what i want to take, but it needs to go!!

DunnoWhoThisIs
12-02-2009, 06:33 PM
BUMP.. i gotta have this thing gone now!!!

DunnoWhoThisIs
12-03-2009, 12:21 AM
Aright guys if its not gone within a few days, (long enough for me to find a job) then im gonna keep it, and prolly wont ever sell it haha..

2000ls6ss
12-03-2009, 10:35 PM
pics to jsanders0071@yahoo.com

DunnoWhoThisIs
12-07-2009, 01:36 PM
bump and pics sent!!

DunnoWhoThisIs
12-14-2009, 05:55 PM
Bump.. Price change $9,300

DunnoWhoThisIs
12-17-2009, 03:20 PM
BUMP again fellas.. $9,000 with the factory pewter spoiler on it..