Wheels & Tires Forged | Billet | Cast | Radials | Slicks

question on the fitment of these tires and wheels

Thread Tools
 
Search this Thread
 
Old 11-02-2009, 04:00 PM
  #1  
Teching In
Thread Starter
 
WS6 DAVE's Avatar
 
Join Date: Oct 2009
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default question on the fitment of these tires and wheels

Anyone know if 285-30-18 will fit on the front of a 2000 trans am without issues? They will be mounted on 18x10 wheels with +41 offset. Also what about 295-30-19 out back without having to do any type of mods. They will be mounted on the same wheel. Thanks for any info.
Old 11-19-2009, 07:43 PM
  #2  
Teching In
 
astroracer's Avatar
 
Join Date: Nov 2009
Location: Mid-Michigan
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
Default

I just put a set of 18 x 9.5's with 285/35's all around. The wheels have a 56mm positive offset. The fronts fit fine, no issues, the rears were running real close to the bumpstops so I trimmed about a quarter inch off them and smoothed them with a die grinder to make a freindly surface.
Mark

Last edited by astroracer; 11-27-2009 at 11:37 AM.




All times are GMT -5. The time now is 07:00 PM.