Hot Cam Intake Centerline Spec?????
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Nov 2005
Location: Braking Point, Turn In, Apex, Exit - Repeat
Posts: 179
Likes: 0
Received 7 Likes
on
5 Posts
Hot Cam Intake Centerline Spec?????
Ok I've looked all over the internet, searched here, google, corvette forum .... everywhere.
I just want to be able to degree a Gen III hot cam and I can't find the one spec I need, intake centerline.
Anyone have this spec laying around???
I know that the Gen III hot cam is supposed to be similar to the LT-4 hot cam and it's centerlines are 109 intake and 115 exhaust, so I may just have to use that.
I already have plenty of differant sources that tell
Duration at .006 279/287
Duration at .050 219/228
Lobe lift 309/309
Lift with 1.7 rockets .525/.525
Lobe seperation 112
Anyone have any suggestions?
Oh btw I'm installing the cam in a C6 vette.
I just want to be able to degree a Gen III hot cam and I can't find the one spec I need, intake centerline.
Anyone have this spec laying around???
I know that the Gen III hot cam is supposed to be similar to the LT-4 hot cam and it's centerlines are 109 intake and 115 exhaust, so I may just have to use that.
I already have plenty of differant sources that tell
Duration at .006 279/287
Duration at .050 219/228
Lobe lift 309/309
Lift with 1.7 rockets .525/.525
Lobe seperation 112
Anyone have any suggestions?
Oh btw I'm installing the cam in a C6 vette.
Last edited by LT-4Play; 11-03-2009 at 05:31 PM.