SPRAYIN96TA

iTrader: (2)

I have a Moser 9in in my 1996 TA WS6 Vert. I am wanting to put full exhaust on it. I know I will have to fab my own up, I have a bender but want to know if anybody elese has done it and if so how hard it was. just wanting to put some tail-pipes on the car to tone it down some. Give it that sleeper feel...

Thanks

EPP

iTrader: (22)

It really isn't much harder to do than it would be with the 10 bolt. A good muffler shop should be able to get it done for you. The panhard relocation bracket might help you out.
http://www.exoticperformanceplus.com....html?item=847 Bob

cody161

iTrader: (18)

my car has a moser 9" in it with a bmr panhard bar relocation bracket on it and i used the factory slp dual dual exhasut on my car with NO complications. its the car in my sig

Z28Roxy

iTrader: (4)

I have over the axle true duals with my huge rear end :p (Dana 60).

It's not the rear that's the problem, it's the brace for the panhard bar that gets in the way. You might want to get that kit that someone else in this thread linked.