vicouSS00

iTrader: (47)

I dont care to spend 60 bucks on the SLP one and i went to home depot today for the "7 dollar fix" and they didn't have the size rubber bellow i needed: 3 1/2 to 4 inch. I just added a 92 mm plate to my kit and need a new bellow considering my old one has a hole in the side from the nozzle i used to have. If anyone remembers what website that was someone had posted a few weeks back with the cheap intake bellows or knows where to order one online please let me know.

Kody

SkullV

iTrader: (11)

siliconeintakes.com

vicouSS00

iTrader: (47)

Thanks!

black01_WS6

iTrader: (13)

what size would I need for a 85mm lid and a 90mm tb with a plate? I just want to make sure I get the right one.

shortdog

iTrader: (1)

Black01 WS6, check out this one: intakehoses.com. I have the same intake setup as yours, but I had to cut the hose down a little.

WS.666

iTrader: (28)

Check my sig for mods...I use a 4" diameter by 6" length...I run MAFless

Datzneat

iTrader: (4)

x2 Cuz the are local to me and do free pickup.