kikass_z28

I hear rumors of some people doing this but I want to hear from the source. Is anyone running like this on the street?

EPP

iTrader: (22)

Ponyhntr is. Bob

93formto98T/A

iTrader: (28)

I'm running a cog drive with a T56 on the street. I'm using the ATI sprag drive freewheel pulley but don't have it running yet. Should have it on the street in the next month or so.

deedubb

iTrader: (9)

Forgive my ignorance, but is this similar to the flip drive belt system that Cartek was developing? Using a one belt for accessories and another for the blower?

Hi-Po

iTrader: (4)

Im interested as well to how many people are actually running a cog drive on the street. If you are, post up your experience.

Mike TexaSS

iTrader: (2)

I have a few customers with cogs and 6 speeds. No issues yet.

Check our website for some cog madness!

kikass_z28

How many of these cars are using the ATI sprag/super pulley?

Brutus

Does anyone sell just the cogged pulley to bolt to the ATI damper?

siguy

ooo i would like to hear more because my 12 rib system always tends to slip some what and would like a better set up so i dont have to crank down the tensioner all the time ...

question how loud is the set up?
How long do the belts last is driven on the street.
does it put a ton of stress on the hub or is it batter the a regular belt system...

stevieturbo

What's your current setup ? Just curious, as you dont hear of too many 12 rib installs.

EPP

iTrader: (22)

We can get it for you. Give us a call and ask for Drew at 260 244-4808 or pm him. His name on here is Azar - Thanks. Bob

Brutus

Thanks Bob

robert miller

has a vette car is really fast look at FUNCOOL over in the c.f. his is a maggie he also has a 250 shot of NOS on it.

SRZ

iTrader: (14)

I hear they aren't friend w/ M6 cars and if you do a lot of down shifting. Any truth to that?

SHovV

iTrader: (1)

whats the advantage/disadvantage street driven, manual trans. cog set up vs. 8-12 rib set up. im interested in this as well. im really lookin into supercharging my current set up. 427 LS6 - M6

bondosgto

i have also heard that.

speedracer5532

iTrader: (8)

I would really like to try a cog setup on my car but for me to try it I would definitely want a sprag pulley on the supercharger and I don't like the ATI sprag. If I could come up with a smaller/lighter sprag I would try a cog setup.

kikass_z28

ttt bump