Have cutout to put on corsa catback. best way to put it in there...
11-17-2009, 07:46 PM
#1
Have cutout to put on corsa catback. best way to put it in there... My new catback of course was big bucks and is full stainless. But cutout is just your basic pipe. Don't really want to weld the corsa,hear stainless is hard to weld to anyway.Could cut and clamp maybe but think stainless band clamps are not the right size to go on the cutout..think heard non stainless band clamps are different size for non stainless pipe.
So wondering if should have exhaust shop make non stainless pipe and then put the cutout in that and can keep my corsa pipe if ever sell the system or want to take out the cutout or wondering if corsa sells the pipe separately.Guess can call them but kind of afraid to ask how much for that one pipe..
So what do you stainless guys do. I don't see many stainless cutouts..Not talking the electric cutout part just the pipe part the cutout goes onto.
So wondering if should have exhaust shop make non stainless pipe and then put the cutout in that and can keep my corsa pipe if ever sell the system or want to take out the cutout or wondering if corsa sells the pipe separately.Guess can call them but kind of afraid to ask how much for that one pipe..
So what do you stainless guys do. I don't see many stainless cutouts..Not talking the electric cutout part just the pipe part the cutout goes onto.
11-17-2009, 07:50 PM
#2
Wow just searched and found these..So just get this and use stainless clamps..done deal..
http://www.pypesexhaust.com/images/yvx13s.jpg
http://www.pypesexhaust.com/images/yvx13s.jpg
