View Full Version : Wanting to get a cam


Midnight_98
11-21-2009, 08:09 PM
I am not very mechanically inclinded, so i was hoping some of you guys could help me out. I am looking to get a cam for my car and was hopeing to get some advice. I am looking for a pretty good size cam but I still want a streetable car. Let me know what you guys think

homerunhtr21
11-21-2009, 08:21 PM
anything below 24x/24x will feel small :secret2: j/k .....Check the internal engine section for MUCH more info on cams.

SOMbitch
11-21-2009, 09:29 PM
This should help you out some. http://www.ls1tech.com/forums/generation-iii-internal-engine/772576-got-cam-heads-rocker-machining-questions-about-ls1-ls2-ls6-read-me-first.html

araber89
11-21-2009, 10:04 PM
If your doing it yourself get a few books and read a lot. There are some good LS1 books out there. the one is how to build high performance LS1/LS6's. And just read up on here lots of good stuff. Also LS1howto.com has a good cam swap write up.

NAAllTheWay
11-22-2009, 09:39 PM
call comp cams or thunder racing or any of the other companies to order your cam, once your on the phone with them they will set you up with what your looking for. thats what they are there for.