Vehicle Classifieds - 2000 Camaro SS ROLLER, 9", QA1's, etc. Nice car...




2 SSlow
12-02-2009, 10:06 AM
2000 Camaro SS ROLLER... $5,500 OBO.

Sebring Silver, ebony leather, t-tops, 6-speed car,

Perfect for a race car project or to put your engine/trans in for a daily driver.

Car will be sold as-is, and must be picked up.

I'm looking to sell my 2000 Camaro SS as a roller. The body has 123,000 miles; looks great for the mileage. Car was always maintained...not that it matter because it won't have a drivetrain.

Interior is a 8 out of 10, exterior is a honest 7 out of 10 (paint looks great, but there are a few blemishes around the car like any 120k miles car). The ebony leather looks excellent for the mileage. 6-speed car. The rear seat is currently gutted to cut down on weight, but can easily be put back to stock. Same with the spare tire and jack. The car has no traction control, cruise control, or abs. A/C will be included with the car. Will have kenwood cd headunit with aux input, and ipod hookup.

I will include the engine/transmission wiring harness for a 6-speed car, PCM, radiator, fans, upper and lower coolant hoses, SLP air lid, mass air flow sensor, engine mounts, transmission mount/cross memeber, Moser 9" rear end with 35 spline axles and a locker, ram adjustable master cylinder, abs delete, spohn adjustable lower contorl arms, bmr adjustable panhard rod, qa1 12 type r 12 way adjustables w/275lb springs up front, and eibach sportlines out back, almost brand new steel driveshaft with 1350 hardened u-joints, and upgraded slip yoke, Racetronix fuel pump with hadwire kit (<1000 miles). I'm sure I'm forgetting some stuff.

The car will be on 16" snow flakes with good tires.

Engine and trans will be pulled out when a $500 non refundable deposit is recieved.

http://i47.photobucket.com/albums/f156/jawall1068/LS2%20Camaro%20Build/EngineComingout031.jpg

It will be on these wheels.
http://i47.photobucket.com/albums/f156/jawall1068/Mobile%20Uploads/Photo0740.jpg

NO enigne included...this is how it currently looks under the hood.
http://i47.photobucket.com/albums/f156/jawall1068/LS2%20Camaro%20Build/LS2Camaro001.jpg

gutted back seat...looks stock - seat belts
http://i47.photobucket.com/albums/f156/jawall1068/Mobile%20Uploads/Photo0712.jpg

This car is not beat up or ragged out like most of these cars are at this mileage. If you have any questions, want more pictures, or want to come look at the car, please feel free to PM me.

Thanks.


bigshotls1
12-02-2009, 10:27 AM
glws t going to be kind of had because there r cars on here running for that price, its kind of a bad time. but who am i just my opinion. I offer u 3000 grand let me know

boosted4life
12-02-2009, 10:32 AM
how for for it with the engine and trans in? :nod:


2 SSlow
12-02-2009, 10:53 AM
I would take $14,000 FIRM for everything. Including the pro-stars. I don't have to sell the car, so I'm not giving it away. I have more than $12,000 in parts alone. Shit, I have over $8,000 in the engine...that that it matters when selling a used car though...hence why it's being parts out, and sold to people that appreciate the parts.

Needa a transmission rebuild, pops out of 3rd gear. Other than that, it would be perfect. Car runs great, uses no oil. It would need rear tires for the pro-stars, and 3rd gear.

2 SSlow
12-02-2009, 10:58 AM
glws t going to be kind of had because there r cars on here running for that price, its kind of a bad time. but who am i just my opinion. I offer u 3000 grand let me know

Sorry, but I have more than that in the rearend, contro arms, QA1's, springs, and fuel pump alone. This car is in great shape. I would sell you the car as a STOCK roller for $3,000....(stock 10 bolts, stock control arms, stock struts/shocks/springs, etc...)

Z28 Van Allen
12-02-2009, 11:24 AM
Are you wanting to part it out or sell it as a roller?

boosted4life
12-02-2009, 11:53 AM
I would be VERY interested in purchasing it all together. What are all the specs on the motor? Any power numbers?

2 SSlow
12-02-2009, 12:04 PM
http://www.ls1tech.com/forums/lsx-parts-sale/1211326-forged-ls2-longblock-afr-205s-ported-fast-92-a.html


I can have it dynoed if you're serious...

Let me know.

boosted4life
12-02-2009, 12:11 PM
I am very interested, do you think it makes over 500 to the wheels? How is it tuned? Is every other gear drivable besides 3rd? Does it pop out all the time or just sometimes? Thanks.

Forgot to ask, is it built for spray, if so, how big of a shot, and has it been sprayed? Also, how many miles on the motor, was it broken in properly?

2 SSlow
12-02-2009, 12:26 PM
I am very interested, do you think it makes over 500 to the wheels? How is it tuned? Is every other gear drivable besides 3rd? Does it pop out all the time or just sometimes? Thanks.

Forgot to ask, is it built for spray, if so, how big of a shot, and has it been sprayed? Also, how many miles on the motor, was it broken in properly?

It should be bored line 500rwhp. The motor would be safe for a 150-200 shot. I wanted a reliable good running street car, and that's exactly what it is. This motor has right at 5,000 miles on it, and has NEVER been sprayed. It was tuned with HP tuners in speed density/open loop. Runs and drives great....gets between 17-19mpg on normal driving (combined city highway). Engine was broke in properly, oil changed at about 200 miles, and again before 1000. Then every 1500 after. It's about to get another one too. The trans doesn't like 3rd gear. It will go in sometimes, but I don't even try because I don't want to damage it anymore than it is. Every other gear is smooth, and works right. The centerforce DFX clutch grabs hard.
The car currently doesn't have power steering, but it can be added back on with the addition of a power steering pump, and longer belt. I have never had a problem driving it this way...

I have never had a problem with this setup...I would drive it across the country if I needed to....

Jason

boosted4life
12-02-2009, 12:45 PM
It should be bored line 500rwhp. The motor would be safe for a 150-200 shot. I wanted a reliable good running street car, and that's exactly what it is. This motor has right at 5,000 miles on it, and has NEVER been sprayed. It was tuned with HP tuners in speed density/open loop. Runs and drives great....gets between 17-19mpg on normal driving (combined city highway). Engine was broke in properly, oil changed at about 200 miles, and again before 1000. Then every 1500 after. It's about to get another one too. The trans doesn't like 3rd gear. It will go in sometimes, but I don't even try because I don't want to damage it anymore than it is. Every other gear is smooth, and works right. The centerforce DFX clutch grabs hard.
The car currently doesn't have power steering, but it can be added back on with the addition of a power steering pump, and longer belt. I have never had a problem driving it this way...

I have never had a problem with this setup...I would drive it across the country if I needed to....

Jason

Im sending you a PM.

2 SSlow
12-03-2009, 07:02 AM
Lots of interest, and trade offers....nothing solid yet. Keep offers/trades coming!

2 SSlow
12-03-2009, 03:42 PM
Bump for the evening crowd. A little more interest, and people coming to check it out. No cash in hand or deposit though.

2thousand2
12-03-2009, 05:26 PM
This car is extremely clean, the miles on the body mean nothing. I would love to buy the engine and put it in my car.

Bumparoo

Pewter35th
12-03-2009, 06:19 PM
http://www.ls1tech.com/forums/lsx-parts-sale/1211326-forged-ls2-longblock-afr-205s-ported-fast-92-a.html


Serious fucking business...nice setup AFRs + intake look bitch would imagine it runs strong & consistent w/all the internal supporting mods GLWS

nprather
12-03-2009, 07:14 PM
Bump for one of the cleanest cars around. Would love to own it.

2 SSlow
12-04-2009, 07:16 AM
Thanks guys....and Nicks...you guys need to buy some stuff. The money would be going to a good cause (paying of the "beater"). LOL.

2 SSlow
12-04-2009, 07:34 AM
Here is the most recent interior pic I have...this was when it sat for 8 months while the engine was going together/waiting on parts... Dusty and dirty, looks much better in person.
http://i47.photobucket.com/albums/f156/jawall1068/LS2Build048.jpg

2 SSlow
12-04-2009, 03:04 PM
TTT for the afternoon crowd.

2 SSlow
12-05-2009, 12:23 PM
Saturday bump...

2 SSlow
12-05-2009, 12:23 PM
Saturday bump

86MonteSS
12-05-2009, 01:01 PM
PM me bottom dollar? i'm interested

2 SSlow
12-10-2009, 09:11 AM
Deal pending on everything. Not parting ANYTHING out unless otherwise noted....


Jason

BLWN1
12-13-2009, 11:36 PM
http://img.photobucket.com/albums/v625/Roller406Bu/000_0022.jpg

Need a roller for your motor, Id like to have another F-body.

2 SSlow
12-14-2009, 07:09 AM
That's a great looking fox. I have a soft spot for the old LX's, but I still have a deal pending, and really don't want roller right now. I just need to get rid of all of this stuff LOL.

Good luck with your sale/trade..

2 SSlow
01-11-2010, 09:52 AM
This car is SOLD, thanks for looking, offers, and comments.

Jason