kevins2000LS1

iTrader: (11)

Seen this cam make good number on the dyno but want to see some track slips!! Going to do a cam swap soon and think about this one or a custom grind joint!

Wiktorek25

All i could find, i bet there are more solid numbers though...

8. Johnathon @ Tick 10.509 @ 131.99 (1.478), 99 T/A, LS1, M6, McLeod Slipper, 5.00, The Polluter, 48, 3020, 11/09

DunnoWhoThisIs

iTrader: (9)

one of my buddies had that cam, before he sold it it ran 7.02 in a 1/8th with a 150 shot, it was a 6spd. he sold it to a guy and he swapped the bbk intake for a fast 90/90 and ran 6.80's in a 1/8th i think with the same shot.. it was a cam only car with intake, headers, cutout, stock suspension.. pretty much cam only..

JonCR96Z

iTrader: (33)

Sounds like they're trying to hard to prove that the cam is good for something. 5.00 gear and a 3020 raceweight. So probably low 11s for a good setup in a streetable car.

Custom is the way to go regardless of what this cam does or doesn't do on someone else's car.

Wiktorek25

damn i didn't even really look at the specs, just saw the time and copied and pasted it... thats a HUGE gear

Orr89rocz

iTrader: (13)

I think my buddy has that cam in his 6.0 liter. Its got the truck intake still I think, and is in a 87 el camino. Ran 11.5's at 119mph

kevins2000LS1

iTrader: (11)

Dang im hoping for some results from a stock LS1 with LS6 intake and maybe a stall but either 6 speed is fine

MUSTANGBRKR02

iTrader: (91)

I would look at the 228 cams.