Milling Trick Flow Heads
#1
Teching In
Thread Starter
Join Date: Jan 2009
Location: Georgetown Tx.
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Milling Trick Flow Heads
I am fixing to get a set of Trick Flow 215 heads that will go on a 408 ls1.The heads have been milled once and the chamber size is 60cc.I need to get them down to 57 cc's. My question is how far can I go? Does the intake side need to be skimmed.Will the runners still line up.
Any advise will be greatly appreciated.
Any advise will be greatly appreciated.