2-3 shift not right
12-15-2003, 03:10 PM
#1
On The Tree
Thread Starter
Join Date: Oct 2003
Location: San Antonio, TX
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
2-3 shift not right So i got my auto in this weekend and all seems well.
Its running on a stock 02 auto program and a PT4400
My car has 3.42's so I got a hypertech PP3 to make up for the gear change from the stock auto program.
well this morning it was banging the limiter on the 2-3 shift....so at lunch time i programmed the HPP3 to lower the shift point as low as it would go (i think it was -12 mph) but it is still banging the limiter (now 6600) not sure what the problem is....
any advice?
1-2 seems to work correctly...
Its running on a stock 02 auto program and a PT4400
My car has 3.42's so I got a hypertech PP3 to make up for the gear change from the stock auto program.
well this morning it was banging the limiter on the 2-3 shift....so at lunch time i programmed the HPP3 to lower the shift point as low as it would go (i think it was -12 mph) but it is still banging the limiter (now 6600) not sure what the problem is....
any advice?
1-2 seems to work correctly...
12-16-2003, 03:03 PM
#4
TECH Senior Member
iTrader: (1)
Join Date: Jan 2003
Location: Armpit of East TX
Posts: 9,343
Likes: 0
Received 0 Likes
on
0 Posts
Sounds like it might be the 3/4 clutch pack. Does it try and pull or does it just totally let go? What about part throttle shifts? Do they work, kinda, not at all?