Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Damn ticking noise

Thread Tools
 
Search this Thread
 
Old 12-17-2009, 10:47 AM
  #1  
12 Second Club
Thread Starter
iTrader: (6)
 
nhraracer's Avatar
 
Join Date: Jan 2008
Location: Gainesville, Florida
Posts: 131
Likes: 0
Received 0 Likes on 0 Posts
Default Damn ticking noise

Ok my TA is making a ticking noise and Id like to figure out what it is before I dive in. It usually is very faint or non-existant at a cold start but gets louder as the engine warms up. The engine occasionaly idles SLIGHTLY rough after warm up. Oil pressure is still good warmed up (20 psi) and car still runs GREAT. It seems to be getting louder since it originally started

Lifter? Bad plugs or wires? Pushrods?
Old 12-17-2009, 02:26 PM
  #2  
TECH Fanatic
iTrader: (9)
 
Cobra4B's Avatar
 
Join Date: Dec 2006
Location: Va Beach
Posts: 1,240
Likes: 0
Received 0 Likes on 0 Posts
Default

I'm having something similar... I'm pretty sure mine is an aging lifter. Looking for similar input in my thread as well.

https://ls1tech.com/forums/generatio...oing-soft.html
Old 12-17-2009, 03:09 PM
  #3  
Teching In
 
ls1fsho's Avatar
 
Join Date: Sep 2009
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Default

check for an exhaust leak, an exhaust leak will usualy be heard more when its fully warmed up
Old 12-17-2009, 05:20 PM
  #4  
12 Second Club
Thread Starter
iTrader: (6)
 
nhraracer's Avatar
 
Join Date: Jan 2008
Location: Gainesville, Florida
Posts: 131
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by ls1fsho
check for an exhaust leak, an exhaust leak will usualy be heard more when its fully warmed up
No need to because Im doing the bolt on mods at the end of this month as well as new wires and plugs and a couple other things. If its still there then I will worry about pulling the heads. But yeah thought of that. Just not too worried because Im already modding it so it will get all new gaskets
Old 12-17-2009, 06:13 PM
  #5  
TECH Regular
iTrader: (6)
 
wytry's Avatar
 
Join Date: Oct 2009
Location: Norton, Ohio
Posts: 429
Likes: 0
Received 0 Likes on 0 Posts
Default

Likely a lifter...don't let it go too long I wore a hole in my head by doing that lol.
Old 12-17-2009, 06:18 PM
  #6  
LS1Tech Sponsor
iTrader: (14)
 
Beau@SDPC's Avatar
 
Join Date: Feb 2009
Location: Lubbock, TX
Posts: 2,262
Likes: 0
Received 2 Likes on 2 Posts
Default

It is a bomb. Get to the Choppa! Prob lifter tick though. What better bolt on mod than a new cam? Wait maybe thats bolt IN. Well in any case good luck. If you need lifters, we have them by the Gm boxful.




All times are GMT -5. The time now is 10:35 PM.