My P&P Head Work!
12-23-2009, 01:03 PM
#1
My P&P Head Work! Had my 243 heads ported and polished by a local guy and they turned out real nice.
Both heads milled .040 with competition 3 angle back cut with throat cut on both ends.
Heads flowed on a 4.025 slider plate mated to a 3.900 bore.
Here are the flow numbers:
.200: 153.6
.300: 223.1
.400: 265.7
.450: 290.4
.500: 311.0
.550: 322.0
.600: 328.3
Both heads milled .040 with competition 3 angle back cut with throat cut on both ends.
Heads flowed on a 4.025 slider plate mated to a 3.900 bore.
Here are the flow numbers:
.200: 153.6
.300: 223.1
.400: 265.7
.450: 290.4
.500: 311.0
.550: 322.0
.600: 328.3
Last edited by 7th Darkness; 12-24-2009 at 11:33 PM. Reason: Added Flow Numbers
12-24-2009, 08:40 AM
#5
TECH Fanatic
iTrader: (34)
Join Date: Jun 2004
Location: lancaster,pa
Posts: 1,625
Likes: 0
Received 0 Likes
on
0 Posts
sounds like you got a heal of a deal. what kind of bench and what bore size were they flowed on? i paid about the same for a VJ, blend, bowl work, and and setting them up. chambers are 64cc
12-24-2009, 08:59 AM
#6
Yeah I got one hell of a deal, can not complain. Ready to bolt-on too. I dont know the exact details of the flow bench but he had just bought a new one and got it setup and I was the first test subject for the new bench. The guy who did them went to school in Houston for this kind of work. Ill see if I cant pull up more info when I get home from work.
