algws6

iTrader: (3)

Which ones hook better? I am going to run a shootout that requires DOT tires so am wondering which hooks better?

ROB'S SS

i prefer hoosiers over et streets. more stabile on the big end and seem to hook better for me

WILWAXU

iTrader: (6)

I think it has alot to do with preference. I've seen people go fast on both.

Noyzee

iTrader: (37)

I had both, I like the QTP a bit better, But the QTP are 15" the et streets i had where 16", But the qtp are more streetable.

algws6

iTrader: (3)

which ones hook better? any 60' times would be great.

kcsoz20

I run the QTP's and have a best 60' of 1.67. I like the tires. I have never run E/T streets.

I run BFG drag radials on the street and have run em at the track too. best 60' on these was 1.79.

Ken

mike c.

iTrader: (1)

I've cut a best of 1.59 and alot of mid to low 1.6's on 305/40/16 m&h racemasters. i have a 6speed(m6)suspenchion mods was only a tq-arm w/lca's lonching at 4,500rpm's.

LOnSLO

iTrader: (15)

Another vote for the Hoosiers. Best 60 on the 27" QTP was 1.553. Never tried the ET's though.

Vents

iTrader: (9)

holy crap! Ryan's still alive!!!

Noyzee

iTrader: (37)

My best on my streets was 1.7, my best on QTP was 1.53 but consistant 1.6'
Alot will depend on suspention upgrades as well.

Villain281H

iTrader: (5)

never run hoosiers, most people 'round here run m/t. I've had a 1.57 on my 26 x 11.5 x 15 et streets

Larry

iTrader: (4)

At HRP I have ran a 1.496 on ET Streets. At LSR I can't seem to get hooked up most of the time with even less air pressure.

I would like to try a set of Hoosiers QTP's if they made a 16" tire wide enough to hook. I only see a 8" wide thread width in 16". My ET Streets are 10". With my 8" factory wheel I'm not using the full 10" thread width anyway so maybe the 8" is all I need.