ls6 egr to non-egr manifold ?'s...
01-02-2010, 08:26 PM
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Jul 2009
Location: Oshawa, ON, CAN
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
ls6 egr to non-egr manifold ?'s... is there any other way to add egr to a non-egr ls6 manifold? i know there's a manifold with egr from SLP but i'm not paying $500+ for one. i've also heard there is a kit available from either lingenfelter or SDPC but i cannot find it anywhere. anyone who can point me in the right direction will automatically become awesome.
01-03-2010, 09:18 AM
#7
I always thought that if I ever needed to put it back on for visual inspection I would just run the tube from the EGR valve to the LS6 mani, drill and tap for the bolt to hold the clamp and clamp the tube to the manifold without actually drilling the big hole for the tube to go thru. They'd never be able to tell it's not functional because the clamp would hide the end of the tube where it touches the manifold.
Trending Topics
01-05-2010, 03:12 AM
#8
01-05-2010, 10:44 PM
#9
I always thought that if I ever needed to put it back on for visual inspection I would just run the tube from the EGR valve to the LS6 mani, drill and tap for the bolt to hold the clamp and clamp the tube to the manifold without actually drilling the big hole for the tube to go thru. They'd never be able to tell it's not functional because the clamp would hide the end of the tube where it touches the manifold.
