Single plain/plate/dry nozzle questions
01-04-2010, 03:32 PM
#1
TECH Regular
Thread Starter
iTrader: (3)
Join Date: May 2008
Location: DFW
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
Single plain/plate/dry nozzle questions Setup is a 402 with LS3 heads and GMPP single plain
option A
-Zex 4150 perimeter plate + dry nozzle about 5" away from the elbow
option B
-2 stage Nitrous Express 4150 plate.
Car is sitting at around 11:1 compression right now. Ive got some milled LS3 heads that will take it to about 12:1.
What do you guys think? the reason im wanting to go 2stage is because im thinking about leaving on 1 kit then grabbing another as soon as traction allows
option A
-Zex 4150 perimeter plate + dry nozzle about 5" away from the elbow
option B
-2 stage Nitrous Express 4150 plate.
Car is sitting at around 11:1 compression right now. Ive got some milled LS3 heads that will take it to about 12:1.
What do you guys think? the reason im wanting to go 2stage is because im thinking about leaving on 1 kit then grabbing another as soon as traction allows
