M1T/A

iTrader: (2)

Well guys i have spun a bearing in my ls1. I have a stock 03 5.3 i am putting in for now, my question is what would be a good street cam for this motor? Its not my everyday driver so i am open to any good street cam. My mods are ls6 intake, slp long tubes, borla catback, p&p tb. Thanks for any help!

5.3LJimmy

iTrader: (10)

220/220-112 would be decent driveability and I would stay at or below 224/224 duration.

hellbents10

iTrader: (10)

We have a few 5.3l grinds that work great on the 5.3ls. Like stated about stay in the 220-224 are for drive ability.

M1T/A

iTrader: (2)

Great thanks guys! Do yall think 350 rwhp be expecting to much from these cams?

BrownBoy

iTrader: (10)

You should make right around 325rwhp on a 5.3L with just the 224-ish cam. It all depends on your tune.

ramdaspadhye

iTrader: (3)

put a turbo on that joker...forget a cam

M1T/A

iTrader: (2)

thats the idea eventually!

Bilster

iTrader: (21)

If you're on a budget, try the second generation Z06 cam (218/204 @ .050" .550/.550 on a 117.5 LSA).

M1T/A

iTrader: (2)

Thanks man i am on a budget.